6X28 Degassing Membrane Contactor DO ≤1ppb, CO₂ ≤1ppm

Products Products

Water Treatment Membrane Series

MBR membrane element Ultrafiltration membrane element Reverse osmosis membrane element Deamination membrane element Ceramic membrane element&module

Special Membrane Series

Degassing membrane Acid-resistant NF membrane Acid-resistant RO membrane Antioxidant RO membrane

Integrated/Containerized Water Treatment Unit

Pure water device Seawater desalination device Integrated MBR device

Download Materials Online Customer

6X28 Degassing Membrane Contactor

DO≤1ppb · CO₂≤1ppm · Ultra-Low Degassing, Reliable Performance

Product Introduction

The membrane contactor is a diffusion‑based separation device that removes dissolved gases (CO₂, O₂, NH₃) from liquids. Its hydrophobically modified hollow‑fiber membranes contain micropores that are permeable to gas but impermeable to water. Under vacuum or sweep‑gas negative pressure, dissolved gases pass through the pores into the fiber lumen and are continuously removed, thereby achieving efficient liquid degassing.

Application Field

Semiconductor / Microelectronics Ultrapure Water

Boiler Feedwater

Oilfield Reclaimed Water / Produced Water Reinjection

Inkjet Ink Degassing

Food & Beverage Industry

Pharmaceutical Purified Water

Product Features

Weaving layout：

Hydrophobic PP hollow fibers are woven into an array and wound around a central tube.

Flow-guide design：

Internal tube and baffles create vertical cross-flow (vs. parallel flow) for enhanced mass transfer.

Removal efficiency：

DO ≤1 ppb, CO₂ ≤1 ppm, NH₃ ≤1 ppm.

Long service life：

Woven array fixes filament spacing, resists impact, eliminates breakage and compression; uniform hydrophobic modification maintains performance over time.

Membrane Parameter

Model	6X28
Membrane Material	PP
Housing Material	ABS
Flow Rate Range	1–11 m³/h
Liquid Side Interface	JIS 50A Flange
Gas Side Interface	JIS 25A Flange
Membrane area	45 m²

Specification

Liquid outside fibers	5–25℃, 7.2 barg (41–77 ℉, 105 psig)
Maximum operating temperature / pressure	50 ℃, 2.1 barg (122 ℉, 30 psig)
Maximum gas pressure	4.1 bar (60 psig)
Remark	Liquid pressure should always be greater than gas pressure
Sealing Material	EPDM
Weight	Wet (liquid outside fibers)：17.5kg
Weight	Dry cartridge：11 kg
Designed in accordance with the "Standards for Drinking Water Quality" (GB 5749-2022)